Construction News

Sun August 04 2024

Related Information

Individuals and firms fined £130,000 after worker's electric shock

1 Jun 11 Two companies, a director and a subcontractor have been fined a total of £130,000 for health and safety failings after a construction worker suffered serious burns following an electric shock from an overhead power cable.

Self-employed steel erector Mark Rushbrook, was constructing two new poultry units at Sunny Farm in Swineshead, Bedfordshire. He was using a scissor lift to clad the gable end of a steel frame when it came into contact with a power cable and he suffered an 11kv electrical shock.

Mr Rushbrook, 24, from West Winch, King's Lynn, Norfolk, sustained burns to his stomach and hands, and internal muscle damage in the incident in June 2009.

The Health and Safety Executive (HSE) charged a number of parties after its subsequent investigation found the gable end of the structure was within just 4.3m of an overhead power line.

HSE told Luton Crown Court on Friday 27 May that the defendants had failed to identify the potential risks of working near overhead voltage lines and had not put necessary precautions in place, including notifying the relevant authorities.

Farm owner C & P Bird Brothers Ltd admitted breaching Section 3(1) of the Health and Safety at Work etc Act 1974, for which it was fined £20,000, and Regulation 21(1) of the Construction (Design and Management) Regulations 2007, for which it was fined £20,000. It was also ordered to pay £5,500 costs on top of the £40,000 fines..

Peter Bird, a director of C & P Bird Brothers, admitted breaching Section 3(1) of the Health and Safety at Work etc Act 1974. He was personally fined £5,000 with £2,500 costs.

Related Information

The company which designed and manufactured the steel frame, Morspan Construction Ltd of 21 Gold Tops, Newport, Gwent, was also the main contractor on the project. It admitted breaching Section 3(1) of the Health and Safety at Work etc Act, for which it was fined £30,000, and Regulation 19(1)(c) of the Construction (Design and Management) Regulations 2007 for which it was fined £30,000.

In addition to the £60,000 fines, Morspan was ordered to pay £5,250 costs.

Self-employed steel erector and subcontractor on the project Michael Skayman of Edenside Drive, Attleborough, Norfolk, admitted breaching Section 3(1) of the Health and Safety at Work etc Act and was fined £25,000 plus £4,750 costs.

HSE inspector John Berezansky said: "As construction work is a high risk activity with significant numbers of major and fatal injuries, good planning, communication and cooperation are needed constantly. Unfortunately, all the defendants in this case failed to achieve this.

"That Mr Rushbrook's injuries were not fatal is only a matter of luck. A lax attitude to health and safety is not acceptable, especially when so many incidents are completely avoidable by taking common sense actions and precautions. The safety standards for working near overhead power lines are well-known and readily available.

"As always, HSE will not hesitate to take action if we find poor practice putting lives at risk."

Got a story? Email news@theconstructionindex.co.uk

MPU
MPU

Click here to view latest construction news »