Construction Contract Leads
No location provided
Category Services
Type
No. of Lots 1
Status Active
Published 31st Jan 2024
Reference | ocds-h6vhtk-04294b |
Common Procurement Vocabulary | Architectural, construction, engineering and inspection services |
Procurement Method | Restricted procedure |
Value | - |
No location provided
Category Services
Type
No. of Lots 1
Status Active
Published 31st Jan 2024
Reference | ocds-h6vhtk-04294b |
Common Procurement Vocabulary | Architectural, construction, engineering and inspection services |
Procurement Method | Restricted procedure |
Value | - |
Section I: Contracting authority
I.1) Name and addresses
University of Strathclyde
McCance Building, 16 Richmond Street
Glasgow
G1 1XQ
Contact
Kenneth Carlin, Category Manager
kenneth.carlin [at] strath.ac.uk
Country
United Kingdom
NUTS code
UKM82 - Glasgow City
Internet address(es)
Main address
Buyer's address
https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00113
I.2) Information about joint procurement
The contract is awarded by a central purchasing body
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Education
Section II: Object
II.1) Scope of the procurement
II.1.1) Title
Provision of Architect for the Charles Huang Advanced Technology & Innovation Centre (CH-ATIC) (RIBA Stages 0-7)
Reference number
UOS-30807-2023
II.1.2) Main CPV code
- 71000000 - Architectural, construction, engineering and inspection services
II.1.3) Type of contract
Services
II.1.4) Short description
The University of Strathclyde (“the University”) is seeking to establish a Contract for the Provision of Architect for the Charles Huang Advanced Technology & Innovation Centre (CH-ATIC) (RIBA Stages 0-7) (UOS-30807-2023).
II.1.6) Information about lots
This contract is divided into lots: No
II.2) Description
II.2.2) Additional CPV code(s)
- 71000000 - Architectural, construction, engineering and inspection services
- 71200000 - Architectural and related services
- 71210000 - Advisory architectural services
- 71220000 - Architectural design services
- 71221000 - Architectural services for buildings
II.2.3) Place of performance
NUTS codes
- UKM82 - Glasgow City
Main site or place of performance
University of Glasgow.
II.2.4) Description of the procurement
The Brief is for the Consultant to provide architectural services for the construction of the Charles Huang Advanced Technology & Innovation Centre (CH-ATIC). This includes a range of services that fall under RIBA Stages 0-7. Please note, the Consultant will be required to perform the roles of Lead Designer, Architect & Principal Designer, and will be responsible for delivering the Scope in full either inhouse, or via subconsultants.
CH-ATIC will deliver a state-of-the-art Innovation & Entrepreneurship Hub that enhances the University’s delivery of one of the UK’s most dynamic and successful ecosystems for the creation of high potential innovation driven enterprises. CH-ATIC will also connect to the wider innovation district to support start-ups and SMEs to ensure inclusive growth and broaden the reach of our industry-led clusters through our collaborative R&D programmes and engagement activities.
CH-ATIC will create a dedicated Social Innovation Hub that connects the business, policy and legal expertise within our award-winning Business School and Humanities & Social Sciences Faculty, with our local communities and public bodies, to enable the translation of disruptive technologies and innovative solutions into viable and socially responsible, businesses, products and services.
Aligning with the UK and Scottish Governments’ commitment to net zero, CH-ATIC will aim to create an exemplar climate neutral building that responds to the climate emergency, and reflects innovative design and construction methods so that, as far as possible, the building is carbon neutral for energy and adapted to climate change. They will also escalate learning and deployment of innovative technologies, and construction solutions as we transition to net zero.
The project objectives, include, however, are not limited to:
- Working to a maximum construction contract value of c. GBP 18million, maximise the working space within the 8 floors, c. 60,000 square feet (5,535 sqm), and create a welcoming entrance to the building, with a new front façade and internal reception area:
- Refurbish the existing building to the design standard(s) / framework(s) specified by the University, it is envisaged that this will be as close to EnerPHit standard as possible, however, may include targets from other standards / frameworks (such as RIBA Sustainable Outcomes (2030) / Net Zero Public Sector Buildings Standard). This is in keeping with the University’s KPI16 commitment to achieve net zero by 2040 by targeting a saving of around two thirds of embodied carbon as compared with a new building, whilst targeting net zero in operation; and
- Create open, inclusive working spaces for multiple groups notionally (and flexibly) split by cluster (5G, Industrial Informatics, Fintech, HealthTech and Space), and organisation (University and non-University / partner spaces), that respond to the need for collaborative, quiet, private and group working spaces, promote collaboration and chance-encounters and encourage people to come into, stay and interact within the building.
Please note, the anticipated construction strategy is to adopt a two-stage design & build, whereby the University is intending to tender / appoint a Contractor under a PCSA during RIBA Stage 3 – Developed Design. At the end of RIBA Stage 4 – Technical Design, the University will either enter a works / construction contract with the same Contractor appointed under a PCSA, and tender the work packages via that same Contractor, or will conduct a new tender exercise to appoint a Contractor.
Please note, the University intends to novate only the Architect, M&E Engineer, and Civil / Structural Engineer to the appointed Contractor for the works / construction, prior to commencement of RIBA Stage 5 – Construction. Subconsultants will also novate as required, with reports to be assigned accordingly.
II.2.5) Award criteria
Quality criterion - Name: Technical / Weighting: 40
Price - Weighting: 60
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
48
This contract is subject to renewal
No
II.2.9) Information about the limits on the number of candidates to be invited
Envisaged minimum number: 6
Objective criteria for choosing the limited number of candidates:
SPD 4C.1.2 will be used as objective criteria for choosing the limited number of Candidates.
II.2.10) Information about variants
Variants will be accepted: No
II.2.11) Information about options
Options: Yes
Description of options
In line with 72 - Modification of Contracts During their Term, of the Public Contracts (Scotland) Regulations 2015, this Contract may be modified without a new procurement procedure in accordance with this Part in some cases.
II.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section III. Legal, economic, financial and technical information
III.1) Conditions for participation
III.1.2) Economic and financial standing
List and brief description of selection criteria
1. SPD (Scotland) Question 4B.1.2: Average Yearly Turnover
2. SPD (Scotland) Question 4B.5: Insurance Requirements
Minimum level(s) of standards possibly required
1. SPD (Scotland) Question 4B.1.2: Average Yearly Turnover
The Candidate will be required to have a minimum average yearly turnover of GBP 1,098,032 for the past 3 financial years.
2. SPD (Scotland) Question 4B.5: Insurance Requirements
It is a requirement that Candidates hold, or can commit to obtain prior to the commencement of any subsequently awarded contract, the types and levels of insurance indicated below;
SPD (Scotland) Question 4B.5.1a
Professional Risk Indemnity: maintain a minimum indemnity limit of GBP 10 million any one claim, and in the aggregate.
SPD (Scotland) Question 4B.5.1b
Employer's (Compulsory) Liability: maintain a minimum indemnity limit of GBP 10 million in respect of each claim, and without limit to the number of claims.
SPD (Scotland) Question 4B.5.2
Public Liability: maintain a minimum indemnity limit of GBP 10 million in respect of each claim, and without limit to the number of claims.
Motor Vehicle Insurance - maintain a minimum indemnity limit of GBP 5 million for Property Damage, and unlimited in respect of Third Party Injury.
III.1.3) Technical and professional ability
List and brief description of selection criteria
1. SPD (Scotland) Question 4C.1.2: Services
2. SPD (Scotland) Question 4D.1: Quality Assurance Schemes
3. SPD (Scotland) Question 4D.2: Environmental Management Standards
Minimum level(s) of standards possibly required
1. SPD (Scotland) Question 4C.1.2: Services
The Candidate will be required to provide examples that demonstrate that they have the relevant experience to deliver the services/supplies as described in part II.2.4 of the OJEU Contract Notice or the relevant section of the Site Notice.
The Candidate must use the template provided for them (Appendix E) to answer question 4C.1.2 of their SPD (Scotland) response, which can be found in the "Appendices" folder within the "Buyer Attachments" area.
The Candidate MUST upload the completed document next to question 4C.1.2. DO NOT UPLOAD THIS DOCUMENT INTO THE “GENERAL ATTACHMENTS” AREA.
The below scoring methodology will be applied to the question.
Excellent response - 4
Response is completely relevant and excellent overall. The response is comprehensive, unambiguous and demonstrates thorough experience, knowledge or skills/capacity/capability relevant to providing similar services to similar clients.
Good response - 3
Response is relevant and good. The response is sufficiently detailed to demonstrate a good amount of experience, knowledge or skills/capacity/capability relevant to providing similar services to similar clients.
Acceptable response - 2
Response is relevant and acceptable. The response demonstrates broad previous experience, knowledge and skills/capacity/capability but may lack in some aspects of similarity e.g., previous experience, knowledge or skills may not be of a similar nature.
Poor response - 1
Response is partially relevant but generally poor. The response shows some elements of relevance to the criterion but contains insufficient/limited detail or explanation to demonstrate previous relevant experience/ capacity/capability.
Unacceptable (Nil or Inadequate response) – 0
Nil or inadequate response. Fails to demonstrate previous experience/capacity/capability relevant to this criterion.
These questions will be scored by a technical panel made up of representatives from the Contracting Authority. Once all scores are agreed, an average score will be applied to all questions.
The Candidate is required to provide one (1) example of services which they have delivered in the past three years that demonstrates they have relevant experience and capacity to deliver the key elements of the services, as described in part II.2.4 of the Contract Notice or the relevant section of the Site Notice and noted individually below.
Please note, the Candidate is permitted to use the same example for one, several, and / or all of their responses, and is also permitted to provide different examples as required and / or appropriate, taking into consideration the requirements outlined under each question.
- Question / Example 1 - Sustainable Construction & Operation Project (25%)
- Question / Example 2 - Refurbishment Project (20%)
- Question / Example 3 - Commercial Mixed-Use Project (20%)
- Question / Example 4 - Budget Control Project (25%)
- Question / Example 5 - Engagement & Communication with Stakeholders (10%)
2. SPD (Scotland) Question 4D.1: Quality Assurance Schemes
Due to restrictions placed upon the character count by the advertising portal, the Candidate should refer to the full detail provided within the document "Appendix D - Contract Notice Additional Information v1", which can be found in the "Appendices" folder, within the "Buyers Attachments" area within the relevant ITP (Invitation to Participate) on PCS-Tender (PCS-T). The Candidate must meet the relevant minimum level(s) of standards set out.
3. SPD (Scotland) Question 4D.2: Environmental Management Standards
Due to restrictions placed upon the character count by the advertising portal, the Candidate should refer to the full detail provided within the document "Appendix D - Contract Notice Additional Information v1", which can be found in the "Appendices" folder, within the "Buyers Attachments" area within the relevant ITP (Invitation to Participate) on PCS-Tender (PCS-T). The Candidate must meet the relevant minimum level(s) of standards set out.
III.2) Conditions related to the contract
III.2.2) Contract performance conditions
For full details of the conditions relevant to the proposed Contract, please refer to the tender documents (details of how to access these being set out in section 1.3) Communication, of this Contract Notice.
The University of Strathclyde will require the members of any tendering group of entities (including, but not limited to consortium members, members of a group of economic operators and/or subcontractors) to be jointly and severally liable for the performance of the Contract (no matter the legal form taken by those entities in order to enter into the Contract).
Section IV. Procedure
IV.1) Description
IV.1.1) Type of procedure
Restricted procedure
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure
Notice number: 2023/S 000-037727
IV.2.2) Time limit for receipt of tenders or requests to participate
Date
4 March 2024
Local time
12:00pm
IV.2.3) Estimated date of dispatch of invitations to tender or to participate to selected candidates
28 March 2024
IV.2.4) Languages in which tenders or requests to participate may be submitted
English
IV.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 3 (from the date stated for receipt of tender)
Section VI. Complementary information
VI.1) Information about recurrence
This is a recurrent procurement: No
VI.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
VI.3) Additional information
In line with regulation 72 of the Public Contracts (Scotland) Regulations 2015, this Contract may be modified without a new procurement procedure in accordance with this Part in some cases.
The buyer is using PCS-Tender to conduct this PQQ exercise. The Project code is 25973. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
In accordance with section 25(3) of the Procurement Reform (Scotland) Act 2014 note that, the University of Strathclyde intends to include community benefit requirements. As part of your response within the Technical Envelope of the Invitation to Tender (ITT), the Tenderer will be requested to commit to the delivery of community benefits in accordance with the methodology outlined in the tender documents.
(SC Ref:756257)
VI.4) Procedures for review
VI.4.1) Review body
Glasgow Sheriff Court and Justice of the Peace Court
1 Carlton Place
Glasgow
G5 9DA
Country
United Kingdom
VI.4.3) Review procedure
Precise information on deadline(s) for review procedures
An economic operator that suffers, or risks suffering, loss or damage attributable to a breach of duty under the Public Contract (Scotland) Regulations 2015 (SSI2015/446) (as amended) may bring proceedings to the Sheriff Court or the Court of Session.