Construction Contract Leads
North East
Category Goods
Type
No. of Lots 1
Status Active
Published 12th Dec 2023
Reference | ocds-h6vhtk-042519 |
Common Procurement Vocabulary | Lathes, boring and milling machine tools |
Procurement Method | Open procedure |
Value | £250,000 |
North East
Category Goods
Type
No. of Lots 1
Status Active
Published 12th Dec 2023
Reference | ocds-h6vhtk-042519 |
Common Procurement Vocabulary | Lathes, boring and milling machine tools |
Procurement Method | Open procedure |
Value | £250,000 |
Section I: Contracting authority
I.1) Name and addresses
NCG Corporation
Rye Hill House, Scotswood Road
Newcastle upon Tyne
NE4 7SA
Contact
NCG
jon.borley [at] ncgrp.co.uk
Telephone
+44 01912004060
Country
United Kingdom
NUTS code
UKC - North East (England)
Internet address(es)
Main address
https://neupc.delta-esourcing.com
Buyer's address
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://www.delta-esourcing.com/
Tenders or requests to participate must be submitted to the above-mentioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at
https://www.delta-esourcing.com/tenders/UK-title/TR5W6QH62A
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Education
Section II: Object
II.1) Scope of the procurement
II.1.1) Title
Engineering Mills and Lathes for Newcastle College
Reference number
NCG231001T
II.1.2) Main CPV code
- 42620000 - Lathes, boring and milling machine tools
II.1.3) Type of contract
Supplies
II.1.4) Short description
Engineering Mills and Lathes for Newcastle College
II.1.5) Estimated total value
Value excluding VAT: £250,000
II.1.6) Information about lots
This contract is divided into lots: No
II.2) Description
II.2.2) Additional CPV code(s)
- 42620000 - Lathes, boring and milling machine tools
- 42623000 - Milling machines
II.2.3) Place of performance
NUTS codes
- UKC - North East (England)
Main site or place of performance
NORTH EAST (ENGLAND)
II.2.4) Description of the procurement
Engineering Mills and Lathes for Newcastle College
II.2.5) Award criteria
Quality criterion - Name: Ability to Meet or Exceed Equipment Specification / Weighting: 25
Quality criterion - Name: Training Provision / Weighting: 5
Quality criterion - Name: Delivery and Commissioning / Weighting: 10
Quality criterion - Name: Service Management / Weighting: 5
Quality criterion - Name: Standard Warranty / Weighting: 5
Quality criterion - Name: Environmental Sustainability / Weighting: 5
Quality criterion - Name: Social Value / Weighting: 5
Cost criterion - Name: Total Cost / Weighting: 40
II.2.6) Estimated value
Value excluding VAT: £250,000
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
36
This contract is subject to renewal
No
II.2.10) Information about variants
Variants will be accepted: No
II.2.11) Information about options
Options: No
II.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project
OfS funding (The Office for Students)
II.2.14) Additional information
To respond to this opportunity please click here: https://neupc.delta-esourcing.com/respond/TR5W6QH62A
Section III. Legal, economic, financial and technical information
III.1) Conditions for participation
III.1.2) Economic and financial standing
Selection criteria as stated in the procurement documents
III.1.3) Technical and professional ability
Selection criteria as stated in the procurement documents
Section IV. Procedure
IV.1) Description
IV.1.1) Type of procedure
Open procedure
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: No
IV.2) Administrative information
IV.2.2) Time limit for receipt of tenders or requests to participate
Date
12 January 2024
Local time
5:00pm
IV.2.4) Languages in which tenders or requests to participate may be submitted
English
IV.2.6) Minimum time frame during which the tenderer must maintain the tender
Tender must be valid until: 12 April 2024
IV.2.7) Conditions for opening of tenders
Date
12 January 2024
Local time
5:00pm
Place
NCG, Rye Hill House
Section VI. Complementary information
VI.1) Information about recurrence
This is a recurrent procurement: No
VI.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
VI.3) Additional information
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-UK-Newcastle-upon-Tyne:-Lathes%2C-boring-and-milling-machine-tools./C76QB85ZY8" target="_blank">https://neupc.delta-esourcing.com/tenders/UK-UK-Newcastle-upon-Tyne:-Lathes%2C-boring-and-milling-machine-tools./C76QB85ZY8
To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/C76QB85ZY8" target="_blank">https://neupc.delta-esourcing.com/respond/C76QB85ZY8
GO Reference: GO-20231212-PRO-24751301
VI.4) Procedures for review
VI.4.1) Review body
NCG
Rye Hill House, Scotswood Road
Newcastle upon Tyne
NE4 7SA
procurement [at] ncgrp.co.uk
Telephone
+44 1912004000
Country
United Kingdom