Construction Contract Leads

Section I: Contracting authority

I.1) Name and addresses

Moray Council

High Street

Elgin

IV30 1BX

Email

procurement [at] moray.gov.uk

Telephone

+44 1343563137

Country

United Kingdom

NUTS code

UKM62 - Inverness & Nairn and Moray, Badenoch & Strathspey

Internet address(es)

Main address

http://www.moray.gov.uk

Buyer's address

https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00160

I.3) Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at

https://www.publictendersscotland.publiccontractsscotland.gov.uk

Additional information can be obtained from the above-mentioned address

Tenders or requests to participate must be submitted electronically via

https://www.publictendersscotland.publiccontractsscotland.gov.uk

I.4) Type of the contracting authority

Regional or local authority

I.5) Main activity

General public services

Section II: Object

II.1) Scope of the procurement

II.1.1) Title

18/1093 Phase 8 Landfill Capping and Restoration Works

Reference number

18/1093

II.1.2) Main CPV code

• 45454100 - Restoration work

II.1.3) Type of contract

Works

II.1.4) Short description

Delivery of Phase 8 Landfill Capping and Restoration Works

II.1.5) Estimated total value

Value excluding VAT: £1,400,000

II.1.6) Information about lots

This contract is divided into lots: No

II.2) Description

II.2.2) Additional CPV code(s)

• 45454100 - Restoration work

II.2.3) Place of performance

NUTS codes

• UKM62 - Inverness & Nairn and Moray, Badenoch & Strathspey

Main site or place of performance

Moray

II.2.4) Description of the procurement

Delivery of Phase 8 Landfill Capping and Restoration Works

II.2.5) Award criteria

Quality criterion - Name: Quality / Weighting: 70

Cost criterion - Name: Price / Weighting: 30

II.2.7) Duration of the contract, framework agreement or dynamic purchasing system

Duration in months

3

This contract is subject to renewal

No

II.2.10) Information about variants

Variants will be accepted: No

II.2.11) Information about options

Options: No

II.2.13) Information about European Union Funds

The procurement is related to a project and/or programme financed by European Union funds: No

Section III. Legal, economic, financial and technical information

III.1) Conditions for participation

III.1.2) Economic and financial standing

List and brief description of selection criteria

The bidder is required to confirm that (to the best of their knowledge) there are no material post balance sheet events or other business issues arising since the date of the last audited financial statements that materially impact the economic and financial standing of the economic operator.

Where the operator is not able to make such a conformation, full details of the relevant events shall be provided along with an explanation of the expected impact on the bidders economic and financial standing.

The bidder confirms they already have or can commit to obtain, prior to the commencement of the contract, the levels of insurance cover indicated below:

Minimum level(s) of standards possibly required

The bidder is required to provide a copy of the last 2 or 3 audited financial statements as evidence of their compliance to meet their statutory obligations.

Employer's (Compulsory) Liability: 5,000,000 GBP (FVE MILLION POUNDS STERLING)

Public Liability: 10,000,000 GBP (FVE MILLION POUNDS STERLING)

III.1.3) Technical and professional ability

List and brief description of selection criteria

Bidders will be required to provide examples of works carried out in the past five years that demonstrate that they have the relevant experience to deliver the work as described in part II.2.4 of the Find a Tender Service Contract Notice or the relevant section of the Site Notice.

Minimum level(s) of standards possibly required

Bidders are require to provide examples of previous experience in delivering similar works

Requirement: Minimum of 2 example applied from within the past 5 years

III.2) Conditions related to the contract

III.2.2) Contract performance conditions

The Bidder must hold a UKAS (or equivalent) accredited independent third party certificate of compliance with

BS EN ISO 14001 (or equivalent) or a valid EMAS (or equivalent) certificate

or

Environmental Policy

Section IV. Procedure

IV.1) Description

IV.1.1) Type of procedure

Open procedure

IV.1.8) Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

IV.2.2) Time limit for receipt of tenders or requests to participate

Date

18 November 2024

Local time

12:00pm

IV.2.4) Languages in which tenders or requests to participate may be submitted

English

IV.2.6) Minimum time frame during which the tenderer must maintain the tender

Duration in months: 6 (from the date stated for receipt of tender)

IV.2.7) Conditions for opening of tenders

Date

18 November 2024

Local time

12:00pm

Place

Moray

Section VI. Complementary information

VI.1) Information about recurrence

This is a recurrent procurement: No

VI.2) Information about electronic workflows

Electronic ordering will be used

Electronic invoicing will be accepted

Electronic payment will be used

VI.3) Additional information

1. The bidder must hold a UKAS (or equivalent) accredited independent third party certificate of compliance in accordance with BS EN ISO 9001 (or equivalent),

OR

2. The bidder must have the following:

a. A documented policy regarding quality management. The policy must set out responsibilities for quality management demonstrating that the bidder has, and continues to implement, a quality management policy that is authorised by their Chief Executive, or equivalent, which is periodically reviewed at a senior management level. The policy must be relevant to the nature and scale of the work to be undertaken and set out responsibilities for quality management throughout the organisation.

b. Documented procedures for periodically reviewing, correcting and improving quality performance including processes for ensuring that the bidder’s quality management is effective in reducing/preventing incidents of sub-standard delivery. This must include the quality of output and general performance.

3. Health and Safety Procedures

The bidder must have a regularly reviewed and documented policy for Health and Safety (H&S) management, endorsed by the Chief Executive Officer, or equivalent. The policy must be relevant to the nature and scale of the work and set out responsibilities for H&S management at all levels within the organisation. The policy must be relevant to the nature and scale of your operations and set out your company’s responsibilities of health and safety management and compliance with legislation.

Note - Organisations with fewer than five employees are not required by law to have a documented policy statement.

Economic operators may be excluded from this competition if they are in any of the situations referred to in regulation 58 of the Public Contracts (Scotland) Regulations 2015.

The Moray Council are a full member in the Supplier Development Programme http://www.sdpscotland.co.uk/home.aspx which provides a range of specialist business support activities including the provision of advice, information and training support including webinars with the aim of assisting businesses to become more capable of accessing and competing for public sector contracts.

The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 27606. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343

(SC Ref:778262)

VI.4) Procedures for review

VI.4.1) Review body

Elgin Sheriff Court

High Street

elgin

IV30 1BU

Email

elgin [at] scotcourts.gov.uk

Telephone

+44 343542505

Country

United Kingdom

• Share
• Share
• Share